Built-inwall hybrid ACO

The comfort solution for the minimalistic architecture, which can also cool now.

efficient and effortless heating with the lowest water temperature
energy-efficient non-condensing cooling in combination with any heat pump that can supply cooling water
improves the seasonal efficiency of each heat pump
makes sure that the condensing boilers are operating at their lowest temperature and as efficiently as possible.
From the designers of the first low temperature heater

The wall-recessed Hybrid automatically switches between heating and light cooling.

The default auto-change-over ACO mode with 3 operating positions.
bedroom mode max. 26 dB(A)
comfort position max. 30 dB(A)
Maximum position for rapid heating or cooling

You don’t have to do anything at all to switch between heating and cooling. Thanks to its accurate room and water temperature sensors the Hybrid heater does this automatically.

Breeze function: fan activated airflow that doesn’t require any cool water.

Heating, Cooling, Breeze

Output

				HEATING				LIGHT COOLING Non-condensing	-
Height [cm]	Length [cm]	Type	Position	75/65/20 [Watts]	55/45/20 [Watts]	45/35/20 [Watts]	35/30/20 [Watts]	16/18/27 50% R.V. [Watts]	Sound pressure dB(A)	Electric power consumption [Watts]	Air flow [m³/h]	Ordering code
All	All	All	All
Loading data from server ...

Documentation
Standard delivery
Dimensions
Connection sets

Standard delivery

light and easily installed by one person. Delivered flat packed in 2 packages for ease of handling and storage
Low-H2O heat exchanger with wall brackets and fixing kit
air vent elbow (standard) or extended air vent (twin) 1/8” and drain plug 1/2”
separation wall dark grey lacquered (not suitable as finished casing)
easy to install fan unit with operation, control and 24VDC power supply
This heater is not equipped with a condensation monitor. It has to be integrated into the installation (only for cooling).